HP Desktop PCs - BIOS Setup Utility information and menu options (2023)

hp-concentra-wrapper-portlet

Actions${title}Loading...

Learn to open and navigate general BIOS menus and settings. Specific menus and functions vary by computer model.

The BIOS (Basic Input Output System) controls communication between system devices such as the disk drive, display, and keyboard. It also stores configuration information for peripheral types, the startup sequence, system and extended memory amounts, and more. Each BIOS version is customized based on the computer model line's hardware configuration and includes a built-in setup utility to access and change certain computer settings.

Note:

If you need to update the BIOS to resolve a specific issue, improve performance, or to support a new hardware component or Windows upgrade, go to HP Consumer Desktop PCs - Updating the BIOS (Basic Input Output System) (Windows). You can update the BIOS whether Windows starts or does not start.

HP Desktop PCs - BIOS Setup Utility information and menu options (1)

Opening the BIOS Setup Utility

Access the BIOS Setup Utility using a series of key presses during the boot process.

  1. Turn off the computer and wait five seconds.

  2. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.

  3. Press f10 to open the BIOS Setup Utility.

    HP Desktop PCs - BIOS Setup Utility information and menu options (2)

BIOS Setup Utility menus and settings

Use the top menu bar to access computer information, security settings, and system configuration options. Available settings vary by computer model.

  • File: Review system information, set date and time, and save or discard changes.

  • Storage: Get storage device information, configure and test storage devices, and select boot options.

  • Security: Set passwords and security settings for system devices and view the System IDs for the computer.

  • Power: Configure power management features.

  • Advanced: Select power-on, bus, and device options such as num lock key behavior.

CAUTION:

Information stored by the BIOS Setup Utility is essential. Use caution when making changes in the BIOS. A mistake might cause the computer to not perform as expected.

BIOS Setup Utility File menu

Review system information, a system log, and options on how to save changes to BIOS settings.

HP Desktop PCs - BIOS Setup Utility information and menu options (3)

  • System Information: Lists BIOS-related system information, computer model and serial numbers, and the processor type.

  • About: Read information about the BIOS Setup Utility.

  • System Log: Review a log of BIOS updates.

  • Set Time and Date: Set the computer time and date.

  • Default Setup: Save BIOS settings changes as the new defaults or restore settings to factory defaults.

  • Apply Defaults and Exit: Return the computer to the default settings and exit from Setup.

  • Ignore Changes and Exit: Ignore any settings changes and exit from Setup.

  • Save Changes and Exit: Save any new settings and exit from Setup.

BIOS Setup Utility Storage menu

Review computer storage specifications and options and make configuration settings changes.

HP Desktop PCs - BIOS Setup Utility information and menu options (4)

  • Device Configuration: Use the arrow keys to select a storage device, and then press enter to review the model number, firmware version, and serial number information.

    HP Desktop PCs - BIOS Setup Utility information and menu options (5)

  • Storage Options: Change from SATA emulation to AHCI.

    HP Desktop PCs - BIOS Setup Utility information and menu options (6)
  • Boot Order: Change the order in which the computer uses the boot devices. Use the arrow keys to move to the item you want to change, and then press enter to drag the device to a new location.

    HP Desktop PCs - BIOS Setup Utility information and menu options (7)

BIOS Setup Utility Security menu

Manage system-related security settings and passwords.

HP Desktop PCs - BIOS Setup Utility information and menu options (8)

  • Setup Password: Create a password for accessing the BIOS Setup Utility.

  • Power-on Password: Create a password used to turn on the computer.

  • Device Security: Choose if certain devices, such as System Audio, Network Controller, and SATA are hidden or available.

    Note:

    If the computer uses integrated audio on the motherboard, System Audio does not display. System Audio displays only if a separate sound card is installed.

    HP Desktop PCs - BIOS Setup Utility information and menu options (9)
  • USB Security: Enable or disable computer USB ports.

  • Slot Security: Enable or disable computer PCI Express Slots.

  • Network Boot: Enable or disable the Network Boot feature.

  • System IDs: View computer System IDs, including Universally Unique Identifier (UUID), SKU number, feature byte, and the hardware and software configuration build ID.

    HP Desktop PCs - BIOS Setup Utility information and menu options (10)
  • System Security: Change the system security settings such as Virtualization Technology, Software Guard Extensions, and Data Execution Prevention. Includes an option to restore security settings to factory defaults.

    HP Desktop PCs - BIOS Setup Utility information and menu options (11)
  • Secure Boot Configuration: Enable or disable Secure Boot or Legacy Boot and select the Secure Boot key type.

    HP Desktop PCs - BIOS Setup Utility information and menu options (12)

BIOS Setup Utility Power menu

Manage hardware and operating system-related power settings and view the CPU fan speed.

HP Desktop PCs - BIOS Setup Utility information and menu options (13)

  • OS Power Management: Enable or disable runtime power management and change idle power savings settings.

    HP Desktop PCs - BIOS Setup Utility information and menu options (14)
  • Hardware Power Management: Enable or disable power management settings for devices including SATA, S4, and S5.

    HP Desktop PCs - BIOS Setup Utility information and menu options (15)
  • Thermal: View the speed for the CPU fan.

    HP Desktop PCs - BIOS Setup Utility information and menu options (16)

BIOS Setup Utility Advanced menu

Manage advanced power and bus options and device options including the number lock state at start up.

HP Desktop PCs - BIOS Setup Utility information and menu options (17)

  • Power-On Options: Change what happens after the computer loses power and the behavior of the Power On Self-Test (POST).

    HP Desktop PCs - BIOS Setup Utility information and menu options (18)
  • BIOS Power-On: Select days and time to automatically turn on the computer.

    HP Desktop PCs - BIOS Setup Utility information and menu options (19)
  • Bus Options: Enable or disable advanced bus options.

    HP Desktop PCs - BIOS Setup Utility information and menu options (20)
  • Device Options: Change device options such as the behavior of the number lock key.

    HP Desktop PCs - BIOS Setup Utility information and menu options (21)

Navigating BIOS Setup Utility menus

Identify the keyboard key used to navigate to and select menus and settings in the Setup Utility.

Keyboard keys and functions

Keyboard key

Description of function

Left or right arrow key

Selects a different menu screen (moves the cursor left or right).

Up or down arrow key

Selects an item (moves the cursor up or down).

enter

Executes a command or selects a submenu.

f10

Saves the current values and returns to the previous menu.

esc

Exits the menu or the BIOS Setup Utility without saving any changes.

Finding the current BIOS version

Open the BIOS Setup Utility System Information to identify the installed BIOS version.

  1. Turn off the computer and wait five seconds.

  2. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.

  3. Press f10 to open the BIOS Setup Utility.

  4. Select the File tab, use the down arrow to select System Information, and then press enter to locate the BIOS revision (version) and date.

    HP Desktop PCs - BIOS Setup Utility information and menu options (22)

Restoring default BIOS Setup Utility settings

Use the BIOS Setup Utility to restore the factory installed BIOS settings.

  1. In the BIOS Setup Utility, select the File tab.

  2. Select Apply Defaults and Exit.

The BIOS Setup Utility closes, and the computer starts up in Windows.

How to update the BIOS

You can update the BIOS if Windows starts or does not start.

If you need to update the BIOS to resolve a specific issue, improve performance, or to support a new hardware component or Windows upgrade, go to HP Consumer Desktop PCs - Updating the BIOS (Basic Input Output System) (Windows).

Resolve issues during a BIOS update

If an issue occurs when updating the BIOS, such as a system hang or an error message displays, an automatic BIOS recovery is attempted.

The system is not be damaged if it can boot into Windows. If this occurs, download and install the latest BIOS update from HP Software and Driver Downloads.

During a BIOS update reboot, a black screen displays and automatic recovery fails

If a black screen displays and automatic recovery fails during a BIOS update reboot, there are two methods to manually recover the BIOS.

  • Use the backup file stored on the hard drive: Turn on the computer, and then immediately press and hold the Windows key HP Desktop PCs - BIOS Setup Utility information and menu options (23) and the B key at the same time until you hear 8 beeps. The BIOS Update utility opens to perform a BIOS recovery.

  • Download the same or newer BIOS file: Go to HP Desktop PCs - Recovering the BIOS (Basic Input Output System), and then follow the steps to create a BIOS recovery USB key on another computer. Insert the USB key into the computer with the BIOS issue to start the recovery. If nothing happens after inserting the key, restart the computer, and then immediately press and hold the Windows key HP Desktop PCs - BIOS Setup Utility information and menu options (24) and the B key at the same time to start the recovery.

");$('#embeddedIframe32255').css({'width' : '800px', 'height' : 'auto'});});$(window).on("load", function(){$(".table-responsive").addClass("enableScrollOnOverflow");$("img.docImage").addClass("img-responsive");$("img.docImage").css("max-width","100%");// $(".section.expandable").prev(":not(.section.expandable)+.section.expandable").find(".expandableHeading").css("border-top", "1px solid #ccc");$(".callout").closest("ol").addClass("calloutList");$('#embeddedIframe32255').css({'width' : '800px', 'height' : 'auto'});//ALM 3290 - changes startvar checkLC = getCCLC();if(checkLC === 'zh'){var anchorList = document.querySelectorAll('.content-link a'); //Select all anchor tag with specific classnamevar modifyAnchorList = Array.prototype.slice.call(anchorList); //Converting nodelist to arraymodifyAnchorList.forEach(function(element) {if (element.href.indexOf("zh-hans") > -1 || element.href.indexOf("zh-hant") > -1) { element.href = element.href.replace(/zh-hans/g, "zh").replace(/zh-hant/g, "zh"); //replacing zh-hans and zh-hant with zh}});}//ALM 3290 - changes end});

FAQs

What is the BIOS Setup utility key for HP? ›

Open the BIOS Setup Utility

Turn off the computer, press the power button, and then repeatedly press the esc key until the Startup Menu opens. Press f10 to enter BIOS Setup Utility.

What is the key combination for HP BIOS recovery? ›

Learn how to restore the BIOS on your HP computer with a key press combination. Turn off the computer and be sure that the AC adapter is connected to power. Press and hold the Windows + b keys, and then simultaneously press the power button.

What is the default BIOS password for HP? ›

What Is the Default BIOS Password for an HP Laptop? Today, there is no default BIOS password with HP laptop. If you're using a personal device, a BIOS password will need to be enabled first. But if your device is asking for a password, someone has manually turned on the function.

How do I get out of BIOS Setup Utility? ›

How to exit the BIOS or CMOS
  1. Press the Esc key to exit without saving any changes.
  2. Press the F10 or F12 key to save changes and exit.
  3. Access the Exit or Save & Exit tab in setup and select the Exit or Save and Exit option.
Jul 31, 2022

How do I get past BIOS Setup Utility? ›

Go to the BIOS settings of the computer that's stuck on the BIOS screen. Change the boot order to let the computer from a USB drive or CD/DVD. Insert the DVD/CD into the problematic PC or plug in the bootable USB into it. Reboot your faulty computer; you will now be able to gain access.

Top Articles
Latest Posts
Article information

Author: Fr. Dewey Fisher

Last Updated: 02/11/2023

Views: 5469

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Fr. Dewey Fisher

Birthday: 1993-03-26

Address: 917 Hyun Views, Rogahnmouth, KY 91013-8827

Phone: +5938540192553

Job: Administration Developer

Hobby: Embroidery, Horseback riding, Juggling, Urban exploration, Skiing, Cycling, Handball

Introduction: My name is Fr. Dewey Fisher, I am a powerful, open, faithful, combative, spotless, faithful, fair person who loves writing and wants to share my knowledge and understanding with you.