How to Enter BIOS Setup on Windows PCs (2023)

In an age where our technology gets smarter and smarter by the month, we often overlook the integral machinery that makes our computers so intuitive.

Each and every time you press your PC’s power button, the BIOS is the first operation to load your operating system and all of the personal settings that make your computer your own.

Whether you need toupdate your BIOSor sweep it clean of systematic bugs, knowing how to enter BIOS is essential for PC users. In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL.

If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

One thing PC users love most about Windows is how many options you can configure directly within your selected system.

Even before your computer has completed a full startup, you can venture into yourBIOS softwareto modify the boot order, enable hardware components, or change the system time and date.

Depending on your computer’s age, entering BIOS may require a few more keystrokes on older PCs than newer ones.

Before pressing any keys or modifying any settings, we’ll walk you through everything you need to know about your PC’s BIOS and how to enter BIOS on your laptop or desktop PC.

What is BIOS?

As your PC’s most important startup program, BIOS, or Basic Input/Output System, is the built-in core processor software responsible for booting up your system.

Typically embedded into your computer as a motherboard chip, the BIOS functions as a catalyst for PC functionality action.

Programmed on an erasable, programmable, read-only memory (EPROM) chip, BIOS is stored on this memory chip which retains data when the power source is switched off. When the PC is powered back on, BIOS retrieves that same stored data.

The BIOS system is also responsible for managing data flow between your computer’s operating system and any attached devices including a hard drive, keyboard, video adapter, printer, or mouse.

Each time you power your PC on, BIOS runs through a process called Power-On Self Test, or POST, that determines whether your attached devices are operating correctly and are in their proper place.

Once all attachments are allocated and given the OK, your computer startup continues as usual and takes you to your load screen in a matter of seconds.

If BIOS detects any problems, an error screen will appear or a series of beep codes will sound, effectively indicating to you that something has gone wrong.

New developments in BIOS technology

BIOS software has existed within computers since the 1980s and has made plenty of leaps and strides when it comes to efficiency and improvement. However, with the rapid speed of technological evolution, BIOS has become outdated and presents a number of roadblocks for today’s tech.

Newer PCscapable of handling several terabytes of storage prove to be too complex for weaker BIOS software. Limited to 16-bit processor modes and booting drives of 2.1TB or less, newer computers are usually equipped with 3TB drives or more.

Thus, the UEFI was born out of necessity for higher-powered booting. The new standard of BIOS accommodates the limitations the old BIOS system couldn’t work around. UEFI, or Unified Extended Firmware Interface Forum, can run in 32-bit or 64-bit modes and theoretically handle drives up to 9.4 zettabytes.

Not only is UEFI a BIOS replacement, but it also functions as a mini operating system that runs on top of your PC’s integrated firmware.

In essence, whether your computer is powered on by BIOS or UEFI, it is this software that you count on for fast boot times and proper processing functionality. Being able to access your PC’s BIOS allows you to perform regular maintenance for healthy computer upkeep.

What are the basic functions of BIOS?

Now that you understand what BIOS is, let’s pe into what it really does for your desktops, laptops, and tablets. BIOS’s functionality can be broken down into four key responsibilities.


As we mentioned before, POST is an acronym for the Power-On Self Test that your PC runs through the moment you turn it on. POST tests the hardware of your PC and ensures that there is nothing out of order and no errors present with your operating system.

POST goes through everything from your keyboard and disk drive to yourRAM speed in a computerand integrated ports. Should everything be in order, POST will continue as usual and allow your PC to boot normally.

If there is a detected error, BIOS will issue an error message that may come in the form of displayed text or a series of error-indicating beeps.

These beeps are always signals to certain messages, so if you happen to get this result, you will need to check out what it means for your computer’s hardware [1].

2. CMOS setup

Your PC stores all low-level settings like system time and hardware configuration within its CMOS.

This means that every change you make to your BIOS structure is saved on this special memory chip called the Complementary Metal-Oxide Semiconductor, or CMOS. The CMOS setup is responsible for setting your password, time, and date.

3. Bootstrap loader

The program that lives within your computer’s EPROM or ROM, the bootstrap loader is tasked with reading your PC’s hard drive boot sector to move along the complete operating system load.

When you restart your PC, the bootstrap loader activates the POST, then loads Windows 10 into memory. Newer PCs have replaced the bootstrap loader with an EFI, or Extensible Firmware Interface.

4. BIOS drivers

BIOS drivers are the many programs stored in your computer’s many memory chips. These low-level drivers are used to boot your system and prompt basic operational controls on your PC.

How to enter BIOS in Windows 10

When you’ve run into an annoying computer bug or need to modify CPU hardware for a newly upgraded processor, you will need access to your computer BIOS.

Laptops with Windows 10and PCs make accessing, checking, and updating your BIOS a breeze by offering two easy methods to achieve the results you’re aiming for. Let’s break down both methods.

Method #1: Use hotkey during boot-up

It may be too quick for you to have ever noticed, but your PC goes through a rapid POST process to get your startup screen loaded up as fast as it can. It is also within this tightly timed window that you can access your BIOS by clicking your PC’s designated hotkey.

Unfortunately, different PC brands were all on different pages when designating a definitive BIOS key.HP laptopsgenerally use F10 or the escape key.

DEL and F2 tend to be the most popular hotkeys for PCs, but if you’re unsure of what your brand’s hotkey is, this list of common BIOS keys by brand may help.

  • Acer:F2 or DEL
  • ASUS:F2 for all PCs, F2 or DEL for motherboards
  • Dell:F2 or F12
  • HP:ESC or F10
  • Lenovo:F2 or Fn + F2
  • Lenovo (Desktops):F1
  • Lenovo (ThinkPads):Enter + F1.
  • MSI:DEL for motherboards and PCs
  • Microsoft Surface Tablets:Press and hold volume up button.
  • Origin PC:F2
  • Samsung:F2
  • Sony:F1, F2, or F3
  • Toshiba:F2

Pressing your assigned BIOS hotkey while your computer boots up should retrieve the BIOS setup utility screen you’re looking for.

For example, on an HP Pavilion, HP EliteBook, HP Stream, HP OMEN, HP ENVY and more, pressing the F10 key just as your PC status comes up will lead you to the BIOS setup screen.

Some manufacturers require repeated hotkey presses, and some require another button to be pressed in addition to the hotkey. To best equip yourself with the most accurate information, check with your PC’s user manual orthe manufacturer’s support page.

Method #2: Use Windows 10’s start menu

As computers have become more technologically advanced than ever, they boot up in seconds before our eyes. This leaves little room for pressing any hotkeys and can leave those looking to get into their BIOS settings puzzled.

For PC users who aren’t able to catch that tiny window to use their hotkey, this method of entering BIOS can be completed through your computer settings.

Step 1.Access your Windows settings

Navigate to your Windows start menu and select “Settings” located on the left panel. You can also access your Windows setting by using Windows shortcut keys Windows + I.

Step 2.Select “Update & security”

Within this window, you may need to scroll down to find the “Update & security” button.

Step 3.Select “Recovery"

Step 4.Click “Restart now”

Under “Advanced startup” you will see a “Restart now” button that allows you to reboot your PC for configuration or restoration.

After your PC boots back up, you will be met with a special menu that gives you the option to “Use a device,” “Continue,” “Turn off your PC,” or “Troubleshoot.”

Step 5.Select “Troubleshoot”

Within this window, select “Advanced options” then select “UEFI Firmware Settings.” This will allow you to enter BIOS on your Windows 10 PC.

Step 6.Confirm your restart

If your PC is running Windows 8.1 or Windows 8, these methods will also work for your older operating system.

How to access Windows 7, Vista, and XP BIOS

The same method of pressing your designated hotkey during boot-up should be able to gain you access into your BIOS. Be sure to press that button as soon as you see your manufacturer’s brand logo.

Older operating systems tend to load more slowly, so your window of time to press your designated hotkey should be wide enough for prompt BIOS access. Follow this three-step method to enter BIOS on Windows 7 or later.

Step 1.Turn off your computer

On older operating systems, you can only access BIOS just before the Microsoft Windows logo appears on your computer screen.

Step 2.Power your PC on

Step 3.Press the BIOS hotkey

The single keystroke or combination of pressed keys will open BIOS on your PC. Oftentimes your computer will indicate on the startup screen which key or keys need to be pressed in order to enter BIOS.

I can’t access BIOS, what do I do?

If you’re still struggling to figure out how to enter BIOS on yourWindows 10 desktop computer, you may find yourself in somewhat of a pickle.

Whether your startup is too fast or you suspect a virus has attacked your hardware, you need access into your BIOS as soon as possible. Fortunately, we’ve got what you need. Try these two troubleshooting methods to gain access into your BIOS.

Troubleshoot method #1: Disable fast startup

If your PC is powering on too quickly for you to know when to press your BIOS hotkey, your timing may be keeping you from accessing your PC’s BIOS.

To slow down your boot time and open your window for hotkey pressing, you will need to disable fast startup.To do this:

1.Locate “Power options” in your control panel

2.Press “Choose what the power button does” in the left panel (you’ll note that the shutdown settings are all greyed out and unavailable for modification)

3.Press “Change settings that are currently available” located above the power button and lid settings (this will allow you to uncheck or check boxes to modify your shutdown settings)

4.Uncheck “Turn on fast startup”

5.Try restarting your PC and entering BIOS with your hotkey again

Troubleshoot method #2: Use an emergency boot disk

In the case that your PC refuses to enter BIOS or gives you the dreaded blue screen of death, you could be faced with boot failure. In order to access BIOS, you can try utilizing an emergency boot disk to bring your PC back to life via USB drive.

Once the USB drive boots up, you should be able to select a boot device at the startup.

1.Click “Repair your computer” instead of the centered “Install now” button

2.Click “Troubleshoot”

3.Click “UEFI Firmware Settings”

4.Click “Restart”

If nothing works, you may need to resort to finding a computer repair specialist in your area to help solve your issues.

[1] Indiana University;If your computer beeps and fails to boot


How to Enter BIOS Setup on Windows PCs? ›

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10's advanced start menu recovery settings.

How get into BIOS on Windows PC? ›

  1. Click Start and then select Settings.
  2. Click Update & Security.
  3. On the left side, click Recovery.
  4. Under Advanced start-up, click Restart Now.
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings.
  8. Click Restart to restart the computer and enter UEFI. ( BIOS)
Mar 7, 2023

How do you boot into BIOS? ›

BIOS Keys by Manufacturer
  1. ASRock: F2 or DEL.
  2. ASUS: F2 for all PCs, F2 or DEL for Motherboards.
  3. Acer: F2 or DEL.
  4. Dell: F2 or F12.
  5. ECS: DEL.
  6. Gigabyte / Aorus: F2 or DEL.
  7. HP: F10.
  8. Lenovo (Consumer Laptops): F2 or Fn + F2.
Apr 25, 2023

What is the key for BIOS setup in PC? ›

Using the Setup Key
  1. Acer: F2 or DEL.
  2. ASUS: F2 or Del.
  3. Dell: F2 or F12.
  4. HP: ESC or F10.
  5. Lenovo: F2 or Fn + F2.
  6. Lenovo Desktops: F1.
  7. Lenovo ThinkPads: Enter + F1.
  8. MSI: DEL for motherboards and PCs.
4 days ago

How do I get into BIOS if PC won't boot? ›

Step 1: Go to Start > Settings > Update & Security. Step 2: Under the Recovery window, click Restart now. Step 3: Click Troubleshoot > Advanced options > UEFI Firmware Settings. Step 4: Click Restart and your PC can go to BIOS.

How to enter BIOS Windows 10 without startup? ›

Yes, you can enter BIOS from the command prompt. To do this, you will need to access the BIOS settings menu and then navigate to the command prompt. Once you are at the command prompt, you will need to type in the following command: biosconfig /interface 0 /user. This will open up the BIOS settings menu.

What is the BIOS key for Windows 10 PC? ›

Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines. Also note that a key like F10 might actually launch something else, like the boot menu.

How to check BIOS in Windows 10? ›

On Windows 7, 8, or 10, hit Windows+R, type "msinfo32" into the Run box, and then hit Enter. The BIOS version number is displayed on the System Summary pane. Look at the "BIOS Version/Date" field.

How to enter BIOS from command prompt Windows 10? ›

Note: Ensure you save any open files before proceeding, as the following steps restart the computer.
  1. Open "Command Prompt" as administrator.
  2. Type: shutdown /r /fw and press Enter.
  3. System will automatically restart into BIOS after one minute.
Oct 27, 2022

How to enter BIOS Windows 10 without UEFI? ›

Press Win + R to open the Run command dialog box. Type msinfo32 and press Enter to open the System Information screen. Select System Summary on the left-hand side pane. Scroll down on the right-hand side pane and locate the BIOS Mode option.

Is BIOS the Boot Menu? ›

A Boot Menu allows users to specify what boot device to use as the computer is booting. The boot sequence is a setting in the BIOS setup that tells the computer what order to look at available boot devices on a computer. In other words, the boot sequence is followed automatically every time the computer boots.

What are the 4 keys to enter BIOS? ›

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL.

How to boot into Safe Mode? ›

On the Windows sign-in screen, press and hold the Shift key while you select Power > Restart .

What is the key to enter BIOS in HP? ›

Open the BIOS Setup Utility

Turn off the computer, press the power button, and then repeatedly press the esc key until the Startup Menu opens. Press f10 to enter BIOS Setup Utility.

How do I check my BIOS on Windows 10? ›

Check Your BIOS Version by Using the System Information Panel. You can also find your BIOS's version number in the System Information window. On Windows 7, 8, or 10, hit Windows+R, type "msinfo32" into the Run box, and then hit Enter. The BIOS version number is displayed on the System Summary pane.

What is the BIOS key for Windows 11? ›

Access Windows 10/11 BIOS by SHIFT + Restart. On the sign-in or lock screen, press and hold the Shift key on your keyboard and click on the power button.

How do I get into the BIOS on a HP Windows 10? ›

Opening the BIOS Setup Utility

Access the BIOS Setup Utility using a series of key presses during the boot process. Turn off the computer and wait five seconds. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens. Press f10 to open the BIOS Setup Utility.

Top Articles
Latest Posts
Article information

Author: Aracelis Kilback

Last Updated: 23/12/2023

Views: 5473

Rating: 4.3 / 5 (44 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Aracelis Kilback

Birthday: 1994-11-22

Address: Apt. 895 30151 Green Plain, Lake Mariela, RI 98141

Phone: +5992291857476

Job: Legal Officer

Hobby: LARPing, role-playing games, Slacklining, Reading, Inline skating, Brazilian jiu-jitsu, Dance

Introduction: My name is Aracelis Kilback, I am a nice, gentle, agreeable, joyous, attractive, combative, gifted person who loves writing and wants to share my knowledge and understanding with you.